A vessel can look ready from the wharf and still be unsafe to take to sea. A flat starting battery, a blocked bilge pump outlet, an expired flare or a crew member unclear on their job can quickly turn a routine run into an emergency. That is why top vessel pre departure checks are not just a box-ticking exercise. They are a Master’s first practical decision of the day.
For Coxswain and Master candidates, this topic comes up repeatedly in AMSA assessments because it tests more than memory. An assessor wants to hear that you can systematically identify risks, make a sound go or no-go decision, and brief people properly before the lines are let go.
Top vessel pre departure checks: start with the voyage
The right checks depend on the vessel, operating area, weather, number of persons on board and nature of the work. A short sheltered-water transfer does not need exactly the same preparation as a commercial fishing trip offshore or a passenger run in deteriorating conditions. But the Master must always begin with a clear plan.
Confirm the intended route, destination, departure and arrival times, likely weather changes, tides, currents and any local notices affecting navigation. Check that the vessel has enough fuel for the planned trip, plus an appropriate reserve. Fuel planning should account for weather, sea state, speed, engine loading and possible diversions. A vessel that is technically capable of the passage may still be unsuitable if the forecast, fuel endurance or crew capability leaves no sensible margin.
This is also the point to consider whether the voyage should be delayed or cancelled. Candidates sometimes feel pressure to say they would continue and manage the issue underway. In real operations, a conservative decision before departure is often the most professional one. If safety equipment is missing, the engine has an unresolved fault or the forecast exceeds the vessel’s safe operating limits, the correct answer may be to remain alongside.
Check the vessel’s watertight integrity and stability
Before starting machinery, inspect the hull, decks, freeing ports, scuppers, hatches, doors, vents and watertight openings. Look for damage, loose fittings, water ingress, corrosion concerns or anything that could affect the vessel’s ability to stay dry and stable.
Bilges deserve particular attention. Check them for unexpected water, oil or fuel, and confirm the bilge pumping arrangements are operational. A high bilge level may indicate a leak that needs investigation before departure. It is not enough to pump the water out and hope for the best.
Stability is another area where an assessor may ask follow-up questions. Check that cargo, stores, fishing gear, tenders and equipment are secured. Consider where passengers and crew will be positioned, particularly on smaller vessels where people moving to one side can create a noticeable list. Avoid high, unsecured loads and ensure loading does not reduce visibility from the helm, restrict access to safety gear or create a trip hazard.
If the vessel has recently loaded fuel, water, ice, catch or deck cargo, take a moment to think about the stability effect. Weight low and central is generally preferable, but every vessel has its own limitations and operating instructions. The Master’s responsibility is to understand the particular vessel, not rely on a rule of thumb alone.
Test propulsion, steering and essential machinery
A pre-departure machinery check should be practical and methodical. Confirm fuel, lubricating oil, coolant and hydraulic fluid levels as applicable. Look for leaks, loose hoses, damaged belts and unusual smells. Check sea-water strainers where fitted, and make sure cooling-water flow is present after the engine starts.
Run the engine and listen for abnormal noise or vibration. Verify the gauges and alarms are functioning and readings are normal. Test ahead and astern propulsion where safe to do so, and confirm steering moves freely from hard over to hard over. For vessels with hydraulic steering, check fluid levels and inspect for leaks. Where there is an emergency steering arrangement, the crew should know how it is accessed and operated.
Electrical checks matter just as much. Confirm battery condition, charging arrangements, navigation lights, deck lights and internal communications. A radio that powers up is not necessarily working properly, so conduct a suitable radio check in accordance with local procedures. On vessels using electronic navigation equipment, ensure the chart display, GPS, AIS and depth sounder are operating, correctly configured and supported by the required backup arrangements.
Do not overstate what a piece of equipment can do. GPS is excellent for position fixing, but it does not replace a proper lookout, paper chart knowledge where required, local awareness or collision avoidance. That distinction shows good command judgement in an oral assessment.
Confirm safety, firefighting and survival equipment
Safety equipment must be present, in date, accessible and suitable for the vessel’s operational area. Checking it means more than spotting it in a locker. You need to know it can be reached quickly, that it is correctly stowed and that crew know how to use it.
For a thorough final sweep, check:
- lifejackets or personal flotation devices for the number of people on board, condition, sizing and ready access
- flares, EPIRB or PLB, life raft and other distress equipment for service status, registration and correct stowage
- fire extinguishers, fire blanket, fixed firefighting systems and emergency shut-offs where fitted
- first-aid equipment, emergency water, torch, tools, anchor and suitable ground tackle
- navigation lights, sound signals, day shapes and emergency lighting relevant to the operation.
The exact carriage requirements vary with vessel class, area of operation and applicable standards. In an assessment, avoid guessing a requirement if you are not certain. Explain that you would refer to the vessel’s safety equipment schedule, operational procedures and relevant regulatory requirements. Then demonstrate that you understand the purpose of each item and how it would be used in an emergency.
Brief the crew and account for every person on board
A capable crew briefing is one of the most valuable pre-departure checks because people cannot perform a task they have not been given. Allocate duties for letting go, lookouts, communications and emergency response. Discuss the route, forecast, expected conditions and any operational hazards such as bar crossings, restricted waters, traffic separation areas or night navigation.
Before departure, account for all persons on board and make sure they have suitable clothing and lifejackets where required. For passenger operations, provide a safety briefing in language people can understand. Point out lifejacket locations, emergency exits, muster arrangements, smoking restrictions, safe movement around the vessel and what to do if someone falls overboard.
For working crews, check fitness for duty. Fatigue, alcohol, drugs, illness and heat stress can affect judgement and reaction time. This is not about making assumptions about people. It is about the Master identifying whether everyone can safely carry out their assigned role.
Prepare the bridge and the departure itself
The final minutes alongside can be rushed, particularly during a busy shift change or when a schedule is tight. That is exactly when a disciplined final check is most useful.
Have charts or electronic navigation systems set for the intended departure. Confirm the first safe course, clearing bearings, wheelhouse visibility and any nearby traffic. Check lines, fenders, gangways and shore connections are ready to be managed or removed safely. Ensure no one is in a pinch point and that communications between the helm and deck crew are clear.
Record the necessary details in the logbook or vessel records, including departure time, persons on board, weather, defects and relevant safety checks. If a defect is found, report it through the vessel’s established process and decide whether it can be safely managed, requires repair before sailing, or makes the voyage unacceptable.
How to answer this in an AMSA assessment
When asked about pre-departure checks, give your answer in an order that sounds like real command practice. Begin with the voyage plan and weather, then move through the vessel’s condition, machinery, safety equipment, crew and final bridge preparation. Explain what you would do if you found a fault. That last part is often where candidates show whether they understand command responsibility.
Avoid reciting a memorised list without context. An assessor may ask, “What if your VHF fails?” or “What would make you postpone the trip?” Your response should relate the fault to the operational area, communications options, weather, persons on board and the vessel’s safety management procedures.
A good pre-departure routine gives you time to find small problems while they are still manageable at the berth. Practise explaining your checks aloud, in the order you would carry them out, and you will be far more confident when an assessor asks you to take command.